Configuring dynamic domain name resolution, Figure 201 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 254
Advertising
233
Figure 201 Static domain name resolution configuration page
2.
Click Add.
Figure 202 Creating a static domain name resolution entry
3.
Configure the parameters, as described in
.
4.
Click Apply.
Table 90 Configuration items
Item Description
Host Name
Configure the mapping between a host name and an IP address in the static domain
mane table.
Each host name corresponds to only one IP address. If you configure multiple IP
addresses for a host name, the most recently configured IP address takes effect..
Host IP Address
Configuring dynamic domain name resolution
1.
From the navigation tree, select Network > DNS.
2.
Click the Dynamic tab.
3.
Select the Enable option for Dynamic DNS.
4.
Click Apply.
Advertising
This manual is related to the following products: