Configuring authorized ip – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 652
631
Configuring authorized IP
The authorized IP function associates the HTTP or Telnet service with an ACL to filter the requests of clients.
Only clients that pass the ACL filtering can access the device.
Before configuring authorized IP, you must create and configure the ACL. For ACL configuration, see
"Configuring QoS."
1.
Select Security > Authorized IP from the navigation tree.
2.
Click the Setup tab.
Figure 674 Configuring authorized IP
3.
Configure authorized IP as described in
Table 203 Configuration items
Item Description
Telnet
IPv4 ACL
Select the IPv4 ACL to be associated with the Telnet service.
Available IPv4 ACLs are what you configure on the page you enter by
selecting QoS > ACL IPv4.
IPv6 ACL
Select the IPv6 ACL to be associated with the Telnet service.
Available IPv6 ACLs are what you configure on the page you enter by
selecting QoS > ACL IPv6.
Web (HTTP)
IPv4 ACL
Select the IPv4 ACL to be associated with the HTTP service.
Available IPv4 ACLs are what you configure on the page you enter by
selecting QoS > ACL IPv4.
4.
Click Apply.