H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 412
391
5.
Configure wireless service:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Click Add.
c.
On the page that appears, set the wireless service name to mac-auth, select the wireless
service type Clear, and click Apply.
Figure 388 Creating a wireless service
6.
Configure MAC authentication:
After you create a wireless service, the wireless service configuration page appears.
a.
In the Security Setup area, select Open-System from the Authentication Type list.
b.
Select the Port Set box, and select mac-authentication from the Port Mode list.
c.
Select the MAC Authentication box, and select system from the Domain list.
d.
Click Apply.
Figure 389 Configuring security settings
7.
Enable the wireless service:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
On the page that appears, select the mac-auth box.
c.
Click Enable.