H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 801)

780
Figure 813 Network diagram
Configuration guidelines
An AP starts traffic-mode load balancing only when both the maximum traffic threshold and maximum
traffic gap are reached.
Configuration procedure
1. Before you configure load balancing, configure AP 1 and AP 2 on the AC to establish a
connection between the AC and each AP.
For the related configuration, see "
Configuring access services ."
2. Configure traffic-mode load balancing:
a. Select Advanced > Load Balance from the navigation tree.
b. On the Load Balance tab, select the Traffic mode, enter the threshold 10, and the traffic gap
40.
c. Use the default values for Max Denial Count and RSSI Threshold.
d. Click Apply.