H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 245)

224
Task Remarks
Displaying LACP-enabled port information
Optional.
Perform this task to view detailed information of LACP-enabled
ports and the corresponding remote (partner) ports.
Creating a link aggregation group
1. From the navigation tree, select Network > Link Aggregation.
2. Click Create.
Figure 194 Creating a link aggregation group
3. Configure a link aggregation group, as described in Table 85 .
4. Click Apply.
Table 85 Configuration items
Item Description
Enter Link Aggregation
Interface ID
Assign an ID to the link aggregation group to be created.
You can view the result in the Summary area at the bottom of the page.
Specify Interface Type
Set the type of the link aggregation interface to be created:
• Static (LACP Disabled).
• Dynamic (LACP Enabled).
Select port(s) for the link
aggregation interface
Select one or multiple ports to be assigned to the link aggregation group.