H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 373)

352
Item Description
Beacon-measurement Type
• Active—The AP sends a beacon measurement requests to the
client. Upon receiving the request, the client broadcasts probe
requests on all supported channels, sets a measurement duration
timer, and, at the end of the measurement duration, compiles all
received beacons and probe responses into a measurement
report.
• Beacon-table—The AP sends a beacon measurement request to a
client. Upon receiving the request, the client measures beacons
and returns a report to the AP. The report contains all beacon
information stored on the client. The client does not perform any
additional measurements.
• Passive—The AP sends a beacon measurement request to a client.
Upon receiving the request, the client sets a measurement duration
timer, and, at the end of the measurement duration, compiles all
received beacons and probe responses into a measurement
report.
Beacon-measurement Interval The interval at which the AP sends beacon requests to clients.
Authentication Mode See " Configuring an authentication mode ."
Client Max Users
Maximum number of clients of an SSID to be associated with the
same radio of the AP.
IMPORTANT:
When the number of clients of an SSID to be associated with the same
radio of the AP reaches the maximum, the SSID is automatically
hidden.
PTK Life Time
Set the pairwise transient key (PTK) lifetime. A PTK is generated
through a four-way handshake.
Bonjour Policy Apply the specified Bonjour policy to the wireless service.
TKIP CM Time
Set the TKIP countermeasure time.
By default, the TKIP countermeasure time is 0 seconds and the TKIP
countermeasure policy is disabled.
Message integrity check (MIC) is designed to avoid hacker
tampering. It uses the Michael algorithm and is very secure. When
failures occur to MIC, the data might have been tampered, and the
system might be under attack. With the countermeasure policy
enabled, if more than two MIC failures occur within the specified
time, the TKIP associations are disassociated and no new
associations are allowed within the TKIP countermeasure time.
Management Right
Web interface management right of online clients.
• Disable—Disable the Web interface management right of online
clients.
• Enable—Enable the Web interface management right of online
clients.
By default, Web interface management right of online clients is
enabled.