H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 856)

835
Configuring AC 1
1. Configure IP addresses for the interfaces, and assign the interfaces to security zones. (Details not
shown.)
2. Create ACL 3101:
a. From the navigation tree, select QoS > ACL IPv4.
b. Click the Add tab.
c. Enter the ACL number 3101, and select the match order Config.
d. Click Apply.
Figure 889 Creating ACL 3101
e. Click the Advanced Setup tab.
f. Select the ACL 3101.
g. Select Permit from the Action list.
h. Select Source IP Address, and enter 10.1.1.0 and 0.0.0.255 as the source IP address and
mask.
i. Select Destination IP Address, and enter 10.1.2.0 and 0.0.0.255 as the destination IP address
and mask.
j. Click Apply.