H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 386)

365
Figure 347 Configuring source IP address verification
3. Select IPv4 or IPv6 for IP Verify Source. By default, the source IP address verification function is
disabled.
4. Click Apply.
NOTE:
•
For a client using an SSID configured with source IP address verification, if it accesses the network through AP
local authentication, the source IP address verification feature is effective but the IP-MAC binding entry for the
client cannot be displayed on the AC. For more information about local authentication, see " Configuring an
authentication mode ."
• If the client needs to roam to an AP of another AC in the roaming group, the AC to which the client roams must
be configured with source IP address verification for the specified SSID. Otherwise, the client connection is lost.
For more information about AP local authentication and WLAN roaming, see "Configuring WLAN roaming".