H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 445
Advertising
424
Figure 443 Security setup
5.
Enable the wireless service:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Select the dot1x box.
c.
Click Enable.
Figure 444 Enabling the wireless service
6.
Enable remote AP and download the configuration file to the AP:
a.
Select AP > AP Setup from the navigation tree.
b.
Click the
icon for the target AP in the list.
The page for configuring an AP appears.
c.
Expand Advanced Setup, set the configuration file to map.cfg, and select Enable from the
Remote AP list.
d.
Click Apply.
Advertising
This manual is related to the following products: