H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 212)

191
Figure 161 Creating an IPv6 static route
3. Specify relevant information, as described in Table 74 .
4. Click Apply.
Table 74 Configuration items
Item Description
Destination IP Address
Enter the destination host or network IP address, in the X:X::X:X
format. The 128-bit destination IPv6 address is a hexadecimal
address with eight parts separated by colons (:). Each part is
represented by a 4-digit hexadecimal integer.
Prefix Length Enter the prefix length of the destination IPv6 address.
Preference
Set a preference value for the static route. The smaller the number, the
higher the preference.
For example, specifying the same preference for multiple static routes
to the same destination enables load sharing on the routes, while
specifying different priorities for them enables route backup.
Next Hop
Enter the next hop address, in the same format as the destination IP
address.
Interface
Select the outgoing interface.
You can select any available Layer 3 interface, for example, a virtual
interface, of the device. If you select NULL 0, the destination IPv6
address is unreachable.