H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 52)

31
Function menu Description User level
Setup Apply a QoS policy to a port. Configure
Remove Remove the QoS policy from the port. Configure
Service Policy
Display the QoS policy applied to a
WLAN-ESS port.
Monitor
Configure the QoS policy applied to a
WLAN-ESS port.
Configure
Advanced
Country/Region Code
Display the country/region code. Monitor
Modify the country/region code. Configure
AC Backup
Setup
Display the address of the backup AC. Monitor
Configure the address of the backup AC. Configure
Status Display the status of the AC. Monitor
Continuous Transmit
Display the continuous transmitting mode
of an AP.
Monitor
Switch the continuous transmitting mode
of an AP.
Configure
Channel Busy Test
Display channel busy rate test results. Monitor
Test busy rate of channels, and output test
results.
Configure
Load
Balancing
Load Balance
Display the load balancing mode and the
current connection status.
Monitor
Configure the load balancing mode and
refresh the current connection status.
Configure
Load Balance
Group
Display load balancing group
configuration.
Monitor
Configure a load balancing group. Configure
AP
AP Module
Display the AP version, including the AP
model and software version.
Monitor
Match and upgrade the software. Configure
Switch to fat AP
Display the model and IP address of the
AP.
Monitor
Switch to fat AP. Configure
Wireless Location
Display wireless location settings. Monitor
Configure, enable, and disable wireless
location.
Configure
Wireless Sniffer
Display wireless sniffer configuration. Monitor
Configure, enable, and disable wireless
sniffer parameters.
Configure
AP Provision
Display AP provision, non AP provision,
and global AP provision settings.
Monitor
Set AP provision, non AP provision, and
global AP provision.
Configure