H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 766)

745
Figure 773 Configuring client-based wireless sniffer
2. Configure client-based wireless sniffer as described in Table 251 .
3. Select Capture Based On ACL.
4. Click Apply.
5. Enter Ethernet frame ACL ID in the Capture ACL field.
6. Click Start.
Configuring AP provision
If you change the provision settings for an associated AP, save the settings to the proprietary
configuration file of the AP, and restart the AP to validate the new settings.
Configuring global provision information
1. Select Advanced > AP Provision from the navigation tree.
2. Click the Global Provision tab.