Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 537
516
Figure 549 Network diagram
Configuration procedure
1.
Configure AP 1 to operate in normal mode. For more information, see "Configuring WLAN
access."
2.
Configure AP 2 to operate in monitor mode. For more information, see "
."
3.
Enable spectrum analysis on a specified radio:
a.
Select Radio > Spectrum Analysis from the navigation tree.
b.
Click Radio.
Figure 550 Configuring radio
c.
Select the radio with the radio mode 802.11n(2.4 GHz).
d.
Click Enable.
4.
Enable spectrum analysis globally on 2.4 GHz radios:
a.
Select Radio > Spectrum Analysis from the navigation tree.
b.
Click 802.11bg.
c.
Enable spectrum analysis, disable channel quality trap (enabled by default), and keep
Microwave oven and Bluetooth in the Trap on Device Types area (remove other devices from
the area by selecting them and clicking >>).
d.
Click OK.