Configuring ssl vpn gateway, Recommended configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 895
874
Configuring SSL VPN gateway
Recommended configuration procedure
Step Remarks
Optional.
View the online user information and the history user
information, and log out online users.
2.
Configuring local SSL VPN users:
Required.
Configure local SSL VPN users—users that need to pass local
authentication to log in to the SSL VPN system.
By default, a local user named guest (without a password)
exists, in denied state.
Required.
Configure a user group, add local users to the user group, and
select the resource groups that the user group can access.
By default, a user group named Guests exists, and no users and
resource groups are assigned for it.
You can also add a local user to existing user groups when you
create the local user.
4. Customizing SSL VPN webpages
Optional.
Customize service interfaces for SSL VPN users.
5. Using a customized webpage file
6.
Configuring resources:
Configuring IP network resources
Configure at least one type of resources.
By default, no resources are configured.
7. Configuring a resource group
Required.
Configure a resource group, and add resources to the resource
group.
By default, resource groups named autohome and autostart
exist.
8. Performing basic configurations for the
Optional
Configure the domain policy, caching policy, bulletin
information for the SSL VPN domain.
9. Configuring authentication policies
Optional.
Configure authentication methods and authentication
parameters for an SSL VPN domain.
Local authentication is always enabled. To use other
authentication methods, manually enable them.