H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 756)

735
Figure 766 Testing busy rate of channels
3. Configure channel busy test as described in Table 244 .
4. Click Start to start the testing.
Table 244 Configuration items
Item Description
AP Name Display the AP name.
Radio Unit Display the radio unit of the AP.
Radio Mode Display the radio mode of the AP.
Test Time Per Channel Set a time period in seconds within which a channel is tested.
NOTE:
•
During a channel busy test, the AP does not provide any WLAN services. All the connected clients are
disconnected.
• Before the channel busy test completes, do not start another test for the same channel.
Configuring load balancing
Band navigation and load balancing can be used simultaneously.
Configuration prerequisites
Before you configure load balancing, verify that: