Viewing guest access tunnels, Configuring bonjour gateway, Enabling bonjour gateway – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 781
760
2.
On the page that appears, select Aggregation AC and configure the parameters as shown in
.
3.
Click Add.
4.
Click Apply.
Table 262 Configuration items
Item Description
Edge AC Address Specify the IP address of the edge AC to be configured on the aggregation AC.
VLAN
Specify a guest VLAN by its name.
Viewing guest access tunnels
Select Advanced > Guest Tunnel from the navigation tree.
Figure 788 Guest access tunnel list
You can view the configurations and status of guest access tunnels on the current AC. The VLAN ID field
shows configured guest VLANs.
Configuring Bonjour gateway
The AC supports centralized forwarding, local forwarding, and policy-based forwarding when it
operates as a Bonjour gateway.
Enable multicast optimization on the Bonjour gateway for media traffic services such as video and audio.
Enabling Bonjour gateway
1.
Select Advanced > Bonjour Gateway from the navigation tree.
Figure 789 Enabling Bonjour gateway
2.
On the page that appears, select Bonjour Gateway and configure the parameters as shown
in
3.
Click Apply.