H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 402)

381
Figure 369 Binding an AP radio
6. Enable 802.11n(2.4GHz) radio:
a. Select Radio > Radio from the navigation tree.
b. Select the ap box to the left of 802.11n(2.4GHz).
c. Click Enable.
Figure 370 Enabling 802.11n(2.4GHz) radio
Configuring the client
1. Launch the client, and refresh the network list.
2. Select the configured service in Choose a wireless network (PSK in this example).
3. Click Connect.
4. In the popup dialog box, enter the key (12345678 in this example), and then click Connect.