H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 468)

447
Manual
1. Select Radio > Radio from the navigation tree, and click the icon for the target AP.
Figure 475 Configuring a radio
2. On the page that appears, select a specified channel from the Channel list.
3. Click Apply.
NOTE:
Specify a working channel for the radios of the MAP and MPP. Specify the same working channel for the
radio of the MAP and the radio of the MPP.
Auto
Set the working channel mode on the MPP and MAP to auto so that the working channel is automatically
negotiated when a WDS link is established between the MPP and MAP.
NOTE:
If you configure the working channel mode of the radios of the MPP and MAP as auto, the automatically
selected working channel is a non-radar channel.