Qos policy configuration procedure, Adding a class – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 687
666
QoS policy configuration procedure
Step
Remarks
Required.
Add a class and specify the operation of the class.
2. Configuring traffic classification rules
Required.
Configure match criteria for the class.
Required.
Add a traffic behavior.
4. Configuring actions for a traffic behavior
Use either method.
Configure various actions for the traffic behavior.
Required.
Add a policy.
6. Configuring classifier-behavior associations for
Required.
Associate a traffic behavior with a class in the QoS
policy.
You can associate a class with only one traffic
behavior in a QoS policy. If a class is associated with
multiple traffic behaviors, the last associated one takes
effect.
7.
Apply the policy:
Applying a QoS policy to a WLAN service
Use either method.
Apply the QoS policy to a port or a WLAN service.
Adding a class
1.
Select QoS > Classifier from the navigation tree.
2.
Click the Add tab.