H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 700)

679
Configuration procedure
Before performing the following configurations, make sure the AC has been configured with wireless
service service1. For more information about the wireless service configuration, see " Configuring access
services ."
1. Define a time range to cover the time range from 8:00 to 18:00 every day:
a. Select QoS > Time Range from the navigation tree.
b. Click the Add tab.
c. On the page as shown in Figure 427 , enter the time range name test-time, select the Periodic
Time Range option, set the Start Time to 8:00 and the End Time to 18:00, and select the
options Sun through Sat.
d. Click Apply.
Figure 706 Defining a time range covering 8:00 to 18:00 every day
2. Add an IPv4 advanced ACL:
a. Select QoS > ACL IPv4 from the navigation tree.
b. Click the Add tab.
c. Enter the ACL number 3000.
d. Click Apply.