H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 919)

898
Figure 958 Adding an available network service
6. Configure the network service as described in Table 290 .
Table 290 Configuration items
Item Description
Destination IP Enter the destination address of the network service.
Subnet Mask Enter the subnet mask of the network service.
Protocol Specify the protocol type of the network service, which can be IP, TCP, or UDP.
Description
Enter a description for the network service.
If you have configured the system to show network services by description, H3C
recommends that you include the network services' network information (subnet
IP/mask) in the description so that users can view desired information after they
log in to the SSL VPN system.
7. Click Apply to add the network service to the network service list.
8. Repeat steps 5 to 7 to add multiple network services.
9. Click the Add button under the shortcuts list to enter the page for adding a network service shortcut.
Figure 959 Adding a network service shortcut
10. Enter a name for the shortcut and specify the Windows command of the shortcut.
11. Click Apply to add the shortcut to the shortcut list.
12. Repeat steps 9 to 11 to add multiple shortcuts.
13. Click Apply at the bottom of the Add Host Resource page.