Configuration procedures – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 807
Advertising
786
Figure 821 Network diagram
Configuration procedures
Before the configuration, assume that you have configured the three APs in AP > AP Setup.
1.
Configure an AP group:
a.
Select AP > AP Group from the navigation tree.
b.
On the page that appears, click Add to create an AP group named update.
2.
Enable the AP version upgrade function for AP 1 and AP 2:
a.
Select ap1 and ap2 from the AP List, click the
icon and add these two APs to the
Selected AP List.
b.
Select Enable from the Firmware Update list.
c.
Click Apply.
Switch
AP 1
AC
AP 2
AP 3
Advertising
This manual is related to the following products: