Applying a policy to a port – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 696
Advertising
675
Figure 701 Setting a policy
3.
Configure classifier-behavior associations, as described in
.
4.
Click Apply.
Table 223 Configuration items
Item
Description
Please select a policy
Select an existing policy in the list.
Classifier Name
Select an existing classifier in the list.
Behavior Name
Select an existing behavior in the list.
Applying a policy to a port
1.
Select QoS > Port Policy from the navigation tree.
2.
Click the Setup tab.
Advertising
This manual is related to the following products: