Nbt alg configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 312
Advertising
291
Figure 274 Adding a NAT address pool
4.
Configure dynamic NAT:
a.
Click Add in the Dynamic NAT area.
The Add Dynamic NAT page appears.
b.
Select Vlan-interface2 for Interface..
c.
Enter 2001 for ACL.
d.
Select PAT for Address Transfer.
e.
Enter 1 for Address Pool Index.
f.
Click Apply.
Figure 275 Configuring dynamic NAT
NBT ALG configuration example
Network requirements
As shown in
, a company using the private network segment 192.168.1.0/24 wants to provide
NBT services to the outside.
Configure NAT and ALG on the AC so that Host A uses 5.5.5.9 as its external IP address, the WINS
server uses 5.5.5.10 as its external IP address, and Host B can access the WINS server and Host A by
using host names.
Advertising
This manual is related to the following products: