Enabling igmp snooping globally – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 200
179
Step Remarks
2. Configuring IGMP snooping on a
Required.
Enable IGMP snooping in the VLAN and configure the IGMP
snooping version and querier feature.
By default, IGMP snooping is disabled in a VLAN.
IMPORTANT:
•
IGMP snooping must be enabled globally before it can be
enabled in a VLAN.
•
After enabling IGMP snooping in a VLAN, do not enable IGMP or
PIM on the corresponding VLAN interface, and vice versa.
•
When you enable IGMP snooping in a VLAN, this function takes
effect for ports in this VLAN only.
3. Configuring IGMP snooping on a
Optional.
Configure the maximum number of multicast groups allowed and the
fast leave function for ports in the specified VLAN.
IMPORTANT:
•
Multicast routing or IGMP snooping must be enabled globally
before IGMP snooping can be enabled on a port.
•
IGMP snooping configured on a port takes effect only after IGMP
snooping is enabled in the VLAN or IGMP is enabled on the
VLAN interface.
Optional.
Enabling IGMP snooping globally
1.
From the navigation tree, select Network > IGMP snooping.
The basic configuration page appears, as shown in
.
2.
Select Enable, and click Apply.
Figure 146 Basic IGMP snooping configurations