Pppoe client configuration example, Network requirements, Figure 225 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 271: Ribed in, Table 94

Advertising
background image

250

Figure 225 Summary

Table 94 Field description

Field Description

Session Number

PPPoE session ID.

Dialer Interface
Number

Number of the dialer interface corresponding to the PPPoE session.

Interface

Ethernet interface where the PPPoE session belongs. This field is null when the PPPoE
session is bundled with a VLAN interface.

Client-MAC

MAC address of the PPPoE client.

Server-MAC

MAC address of the PPPoE server.

Status

PPPoE session state:

IDLE—PPPoE client negotiation is not performed.

PADI—PADI packets have been sent. The interface is waiting for the PADO

response.

PADR—PADR packets have been sent. The interface is waiting for the PADS

response.

PPPNEG—PPP negotiation is started.

PPPUP—PPP negotiation is completed.

PPPoE client configuration example

Network requirements

Configure PPPoE client on the AC and enable the PPPoE client to communicate with the PPPoE server, as

shown in

Figure 226

.

Figure 226 Network diagram

Advertising