H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 168)

147
Figure 111 Creating an SNMP group
4. Configure an SNMP user:
a. Click the User tab.
b. Click Add.
The page in
Figure 112 appears.
c. Enter user1 in the User Name field.
d. Select Auth/Priv from the Security Level list.
e. Select group1 from the Group Name list.
f. Select MD5 from the Authentication Mode list.
g. Enter authkey in the Authentication Password and Confirm Authentication Password fields.
h. Select DES56 from the Privacy Mode list.
i. Enter prikey in the Privacy Password and Conform Privacy Password fields.
j. Click Apply.