H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 318)

297
Item Description
Interface Status
Display and set the interface status:
• Connected—Indicating that the current interface is up and connected, click
Disable to shut down the interface.
• Not connected—Indicating that the current interface is up but not connected,
click Disable to shut down the interface.
• Administratively Down—Indicating that the current interface is shut down by
a network administrator, click Enable to bring up the interface.
Connect Mode:
Manual Select Manual as the connection mode. In this mode, you must manually assign
an IP address and subnet mask to the interface.
TCP-MSS Configure the TCP MSS on the interface.
MTU Configure the MTU on the interface.
IP Address Configure an IP address for the interface.
IP Mask Configure the subnet mask for the interface.
Gateway IP Address Configure the next hop for the static route.
DNS1 Assign an IP address to the DNS servers. DNS1 has a higher precedence than
DNS2.
To configure a global DNS server, select Advanced > DNS Setup > DNS
Configuration from the navigation tree. The global DNS server has a higher
precedence than all the DNS servers configured on the interfaces. That is, an
interface first sends a query request to the global DNS server. If failing to
receive a response, it sends query requests to the DNS servers configured on
the interfaces one by one.
DNS2
Table 106 Configuration items (PPPoE mode)
Item Description
WAN Interface Displays the name of the Ethernet interface to be configured.
Interface Status
Display and set the interface status:
• Connected—Indicating that the current interface is up and connected, click
Disable to shut down the interface.
• Not connected—Indicating that the current interface is up but not connected,
click Disable to shut down the interface.
• Administratively Down—Indicating that the current interface is shut down by
a network administrator, click Enable to bring up the interface.
Connect Mode: PPPoE Select PPPoE as the connection mode.
User Name Configure the username for authentication.
Password
Displays whether a password is configured for authentication.
If the field displays null, no password is configured for authentication.
New Password Set or modify the password for authentication.
TCP-MSS Configure the TCP MSS on the interface.
MTU Configure the MTU on the interface.