H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 601)

580
Figure 607 Configuring a local EAP server
4. Configure the AP:
a. From the navigation tree, select AP > AP Setup.
b. Click Add.
c. Enter the AP name ap1.
d. Select the device model WA3628i-AGN.
e. Select Manual and enter the serial number in the field below the list.
f. Click Apply.
Figure 608 Configuring the AP
5. Create the wireless service:
a. From the navigation tree, select Wireless Service > Access Service.
b. Click Add.
c. Enter the wireless service name 802.1x-auth.
d. Select the service type crypto.
e. Click Apply.
The wireless service configuration page appears.