Displaying aggregate interface information – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 246
225
Displaying aggregate interface information
1.
From the navigation tree, select Network > Link Aggregation.
The Summary tab is displayed by default. The list on the upper part of the page displays
information about all the aggregate interfaces.
2.
Select an aggregate interface from the list.
The list on the lower part of the page displays detailed information about the member ports of the
associated link aggregation group.
Figure 195 Displaying aggregate interface information
Table 86 Field description
Field Description
Aggregation interface
Type and ID of the aggregate interface.
Bridge-Aggregation represents a Layer 2 aggregate interface.
Link Type
Type of the aggregate interface:
•
Static.
•
Dynamic.
Partner ID
ID of the remote device, containing its LACP priority and MAC address.
Selected Ports
Number of Selected ports in each link aggregation group.
Only Selected ports can transmit and receive user data.
Standby Ports
Number of Unselected ports in each link aggregation group.
Unselected ports cannot transmit or receive user data.