Verifying the configuration, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 428
407
Figure 418 Configuring the wireless client (3)
Verifying the configuration
•
After the user enters username user and password dot1x in the popup dialog box, the client can
associate with the AP and access the WLAN.
•
You can view the online clients on the page you enter by selecting Summary > Client.
Dynamic WEP encryption-802.1X authentication
configuration example
Network requirements
Perform dynamic WEP encryption-802.1X authentication on the client.
•
Use IMC as a RADIUS server for AAA. On the RADIUS server, configure the client's username as
user, password as dot1x, and shared key as expert. The IP address of the RADIUS server is
10.18.1.88.
•
On the AC, configure the shared key as expert, and configure the AC to remove the domain name
of a username before sending it to the RADIUS server. The IP address of the AC is 10.18.1.1.