Configuring advanced settings – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 339
318
Item Description
5GHz Radio
•
Enable—Enable the 5 GHz radio.
•
Disable—Disable the 5 GHz radio.
By default, the 5 GHz radio is disabled.
An AP examines the configuration before it uses the configuration of the AP group to
which it belongs. An AP might fail to implement the configuration due to configuration
conflicts such as a disconnected uplink with uplink detection enabled.
2.4GHz Radio
•
Enable—Enable the 2.4 GHz radio.
•
Disable—Disable the 2.4 GHz radio.
By default, the 2.4 GHz radio is disabled.
An AP examines the configuration before inheritance. An AP might fail to implement the
configuration because of configuration conflicts such as a disconnected uplink with
uplink detection enabled.
Configuring advanced settings
Figure 300 Configuring advanced settings