Load-balancing modes – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 736
715
Figure 746 Requirement of WLAN load-balancing implementation
Load-balancing modes
The AC supports two load balancing modes: session mode and traffic mode.
•
Session mode load-balancing:
Session-mode load balancing is based on the number of clients associated with the AP/radio.
As shown in
, Client 1 is associated with AP 1, and Client 2 through Client 6 are
associated with AP 2. The AC has session-mode load balancing configured: the maximum number
of sessions is 5, and the maximum session gap is 4. Then, Client 7 sends an association request
to AP 2. The maximum session threshold and session gap have been reached on AP 2, so AP 2
rejects the request. Finally, Client 7 associates with AP 1.
Figure 747 Network diagram for session-mode load balancing
•
Traffic mode load-balancing