Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 306
Advertising
285
Figure 262 Network diagram
Configuration procedure
1.
Enable ALG for FTP. (By default, ALG is enabled for FTP, and this step can be skipped.)
a.
Select Network > ALG from the navigation tree.
b.
Add ftp to the Selected Application Protocols list, as shown in
c.
Click Apply.
Figure 263 Enabling ALG for FTP
2.
Configure ACL 2001:
a.
Select QoS > ACL IPv4 from the navigation tree.
b.
Click the Add tab.
c.
Enter 2001 for ACL Number, as shown in
.
d.
Click Apply.
Host
FTP server
Local: 192.168.1.2
Global: 5.5.5.10
AC
Internet
Vlan-int1
5.5.5.1/24
192.168.1.1/24
Advertising
This manual is related to the following products: