H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 647)

626
Configuring whitelist
1. Select Security > Filter from the navigation tree.
2. Click the Whitelist tab.
Figure 665 Configuring a whitelist
3. Click Add.
Figure 666 Adding a whitelist
4. Add a whitelist as described in Table 202 .
Table 202 Configuration items
Item Description
MAC Address Select MAC Address, and then add a MAC address to the whitelist.
Select from Connected
Clients
If you select the option, the table below this option lists the current existing
clients. Select the options of the clients to add their MAC addresses to the
whitelist.
5. Click Apply.
Rogue detection configuration example
Network requirements
As shown in Figure 388 , a monitor AP (AP 2 with serial ID SZ001) and AP 1 (serial ID SZ002) are
connected to an AC through a Layer 2 switch.