Configuring a pppoe client – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 268
Advertising
247
Configuring a PPPoE client
1.
From the navigation tree, select Network > PPPoE.
The system automatically enters the Client page.
Figure 222 PPPoE client information
2.
Click Add.
The page for creating a PPPoE client appears.
Figure 223 Creating a PPPoE client
3.
Configure the parameters for the PPPoE client, as described in
.
4.
Click Apply.
Advertising
This manual is related to the following products: