H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 311
Advertising
290
Figure 272 Configuring an ACL rule to permit packets sourced from 192.168.1.0/24
To prohibit other users to access the Internet:
a.
Select Deny for Action, as shown in
.
b.
Click Add.
Figure 273 Configuring an ACL rule to deny packets
3.
Configure the NAT address pool:
a.
Select Network > NAT from the navigation tree.
The Dynamic NAT page appears.
b.
Click Add in the Address Pool area.
The Add NAT Address Pool page appears.
c.
Enter 1 for Index.
d.
Enter 5.5.5.9 for Start IP Address.
e.
Enter 5.5.5.11 for End IP Address.
f.
Click Apply.
Advertising
This manual is related to the following products: