H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 164)

143
3. Configure an SNMP read/write community:
a. Click Add on the Community tab.
b. Enter private in the Community Name field and select Read and write from the Access Right list,
as shown in
Figure 104 .
c. Click Apply.
Figure 104 Creating an SNMP read/write community
4. Enable the agent to send SNMP traps:
a. Click the Trap tab.
b. Select the Enable SNMP Trap box.
c. Click Apply.
Figure 105 Enabling the agent to send SNMP traps
5. Configure an SNMP trap target host:
a. Click the Trap tab.
b. Click Add.
c. Select the IPv4/Domain option, enter the destination address 1.1.1.2, enter public in the
Security Name field, and select v1 from the Security Model list, as shown in
Figure 106 .
To make sure the NMS can receive traps, specify the same SNMP version as configured on the
NMS.