H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 754)

733
To configure client information backup:
1. Select Advanced > AC Backup from the navigation tree.
You are placed on the Setup tab. See
Figure 479 .
2. Select Enable to the right of Backup Client Information.
3. Click Apply.
Configuring continuous transmitting mode
1. Select Advanced > Continuous Transmit from the navigation tree.
Figure 761 Configuring continuous transmitting mode
2. Click the icon for the target radio. The transmission rate varies with radio mode.
When the radio mode is 802.11a/b/g, the page shown in Figure 483 appears. Select a
transmission rate from the list.
Figure 762 Selecting a transmission rate (802.11a/b/g)
When the radio mode is 802.11n, the page shown in Figure 484 appears. Select an MCS index
value to specify the 802.11n transmission rate. For more information about MCS, see
"Configuring radios."
Figure 763 Selecting an MCS index (802.11n)
When the radio mode is 802.11ac, the page shown in Figure 485 appears. Select a VHT MCS
index value and a VHT NSS index value to specify the 802.11ac transmission rate. For more
information about VHT MCS and VHT NSS, see "Configuring radios."