Configuring the domain policy, Performing basic configurations for the, Ssl vpn domain – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 923: Configuring the domain, Policy
902
Performing basic configurations for the SSL VPN
domain
Configure a domain policy, caching policy, and a bulletin:
•
Domain policy—Defines the common parameters and functions for the SSL VPN domain.
•
Caching policy—Specifies which cached contents to clear from user hosts when users log out from
the SSL VPN system.
•
Bulletin management—Allows you to provide different information to different users.
Configuring the domain policy
1.
Select SSL VPN > Configure Basic Settings from the navigation tree.
The Domain Policy tab appears, as shown in
Figure 966 Domain policy
2.
Configure the domain policy as described in
.
3.
Click Apply.
Table 294 Configuration items
Item Description
Enable security check
Select this item to enable security check.
With security check enabled, the SSL VPN system checks a user host based on the
security policy and determines whether to allow the user to access resources according
to the check result.
IMPORTANT:
To implement user host security check, you must also configure the security policy. See
"
Use verification code
Select this item to use verification codes.
After you select this item, users must enter the correct verification codes to log in to the
SSL VPN system.