H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 423
Advertising
402
Figure 410 Adding an access device
2.
Add service:
a.
Click the Service tab.
b.
Select User Access Manager > Service Configuration from the navigation tree.
c.
Click Add.
d.
On the page that appears, set the Service Name to dot1x, select the Certificate Type as
EAP-PEAP AuthN, select the Certificate Sub-Type as MS-CHAPV2 AuthN, and click Apply.
Figure 411 Adding a service
3.
Add an account:
a.
Click the User tab.
b.
Select User > All Access Users from the navigation tree.
c.
Click Add.
Advertising
This manual is related to the following products: