H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 915)

894
Figure 953 TCP services
3. Click Add to enter the page for adding a common TCP service.
Figure 954 Adding a TCP service resource
4. Configure the common TCP service as described in Table 288 .
5. Click Apply.
Table 288 Configuration items
Item Description
Resource Name
Enter a name for the common TCP service resource.
The resource name must be unique in the SSL VPN system. Resources are uniquely
identified by their names.
IMPORTANT:
If you do not configure the command for Command, H3C recommends including the
resource type, local address, and local port in the resource name so that users can view
the desired information after they log in to the SSL VPN system.
Service Type Enter the type for the TCP service.
Remote Host
Enter the host name or IP address of the remote host that provides the common TCP
service.
Remote Port Enter the port number that the remote host uses for the common TCP service.
Local Host Enter a loopback address or a character string that represents a loopback address.
Local Port Enter the port number that the local host uses for the common TCP service.
Command Configure the Windows command for the resource.