Configuring ac 2, Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 819
Advertising
798
−
802.1X client function.
−
Username test and password test.
−
Authentication method peap-mschapv2.
j.
Click the Provision APs tab.
Figure 841 Configuring provision APs
k.
Select the boxes to the left of ap1 and ap2.
l.
Click Apply Provision.
Configuring AC 2
Configure wireless service on AC 2. For more information, see "
Verifying the configuration
1.
On AC 1, select Summary > AP from the navigation tree.
Figure 842 AP information page
2.
Select the boxes to the left of ap1 and ap2.
3.
Click Reboot.
After restart, AP 1 and AP 2 establish connections to AC 1.
4.
On AC 2, select Summary > AP from the navigation tree.
The two APs are both in Run status.
Advertising
This manual is related to the following products: