H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 420
399
b.
Click Add.
c.
On the page that appears, set the AP name to ap, select the AP model WA3628i-AGN, select
Manual from the Serial ID list, enter the AP serial ID, and click Apply.
Figure 404 Configuring an AP
6.
Configure wireless service:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Click Add.
c.
On the page that appears, set the service name to dot1x, select the wireless service type
Crypto, and click Apply.
Figure 405 Creating a wireless service
7.
Configure 802.1X authentication:
After you create a wireless service, the wireless service configuration page appears.
a.
In the Security Setup area, select Open-System from the Authentication Type list, select the
Cipher Suite box, select AES from the Cipher Suite list, and select WPA2 from the Security IE list.
b.
Select the Port Set box, and select userlogin-secure-ext from the Port Mode list.
c.
Select system from the Mandatory Domain list.
d.
Select EAP from the Authentication Method list.
e.
Disable Handshake and Multicast Trigger (recommended).
f.
Click Apply.