Configuring ac 1 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 793
Advertising
772
Figure 803 Network diagram
Configuring AC 1
1.
Configure AC 1 so that a connection is set up between AC 1 and AP 1.
For more information about configurations, see "
."
2.
Select AP > AP Setup from the navigation tree.
3.
Click the icon
for the target AP.
4.
Expand Advanced Setup.
5.
Set the connection priority to 7.
6.
Click Apply.
Advertising
This manual is related to the following products: