H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 887
Advertising
866
Figure 922 Configuring a rule to permit packets from 10.1.1.0/24 to 10.1.2.0/24
3.
Configure an IPsec proposal named tran1:
a.
From the navigation tree, select VPN > IPSec.
b.
Click the Proposal tab.
c.
Click Add.
d.
On the page that appears, select Custom mode.
e.
Enter the IPsec proposal name tran1.
f.
Select the packet encapsulation mode Tunnel.
g.
Select the security protocol ESP.
h.
Select the authentication algorithm SHA1.
i.
Select the encryption algorithm DES.
j.
Click Apply.
Advertising
This manual is related to the following products: