H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 545)

524
Item Description
Enable MAC VLAN
Select the option to enable MAC-based VLAN.
NOTE:
Only hybrid ports support the feature.
Auth-Fail VLAN
Specify an existing VLAN as the Auth-Fail VLAN to accommodate users that have failed
802.1X authentication.
For more information, see "
Configuring an Auth-Fail VLAN ."
Configuring an 802.1X guest VLAN
Configuration guidelines
• You can configure only one 802.1X guest VLAN on a port. The 802.1X guest VLANs on different
ports can be different.
• Assign different IDs to the default VLAN and 802.1X guest VLAN on a port, so the port can correctly
process incoming VLAN tagged traffic.
• With 802.1X authentication, a hybrid port is always assigned to a VLAN as an untagged member.
After the assignment, do not re-configure the port as a tagged member in the VLAN.
• Use Table 169 when you configure multiple security features on a port.
Table 169 Relationships of the 802.1X guest VLAN and other security features
Feature Relationship description
MAC authentication guest VLAN on a port
that performs MAC-based access control
Only the 802.1X guest VLAN take effect. A user that fails
MAC authentication will not be assigned to the MAC
authentication guest VLAN.
802.1X Auth-Fail VLAN on a port that
performs MAC-based access control
The 802.1X Auth-Fail VLAN has a higher priority.
Port intrusion protection on a port that
performs MAC-based access control
The 802.1X guest VLAN function has higher priority than
the block MAC action, but lower priority than the
shutdown port action of the port intrusion protection
feature.
Configuration prerequisites
• Create the VLAN to be specified as the 802.1X guest VLAN.
• If the 802.1X-enabled port performs port-based access control, enable 802.1X multicast trigger at
the CLI. (802.1X multicast trigger is enabled by default.)
• If the 802.1X-enabled port performs MAC-based access control, configure the port as a hybrid port,
enable MAC-based VLAN on the port, and assign the port to the 802.1X guest VLAN as an
untagged member.
Configuring an Auth-Fail VLAN
Configuration guidelines
• You can configure only one 802.1X Auth-Fail VLAN on a port. The 802.1X Auth-Fail VLANs on
different ports can be different.