Adding a policy, Configuring classifier-behavior associations for, The policy – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 695
674
Item
Description
Filter
Configure the packet filtering action.
After selecting the Filter option, select one item in the following list:
•
Permit—Forwards the packet.
•
Deny—Drops the packet.
•
Not Set—Cancels the packet filtering action.
Accounting
Configure the traffic accounting action.
Select the Accounting option and select Enable or Disable in the
following list to enable/disable the traffic accounting action.
TIP:
This configuration item is not supported.
Adding a policy
1.
Select QoS > QoS Policy from the navigation tree.
2.
Click the Add tab.
3.
Set the policy name.
4.
Click Add.
Figure 700 Adding a policy
Configuring classifier-behavior associations for the policy
1.
Select QoS > QoS Policy from the navigation tree.
2.
Click the Setup tab.