Configuring service management – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 275
254
Configuring service management
1.
From the navigation tree, select Network > Service.
The service management configuration page appears.
Figure 229 Service management
2.
Enable or disable various services on the page, as described in
.
3.
Click Apply.
Table 95 Configuration items
Item Description
FTP
Enable FTP
service
Specify whether to enable the FTP service.
The FTP service is disabled by default.
ACL
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Telnet
Enable Telnet
service
Specify whether to enable the Telnet service.
The Telnet service is enabled by default.
SSH
Enable SSH
service
Specify whether to enable the SSH service.
The SSH service is disabled by default.
SFTP
Enable SFTP
service
Specify whether to enable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.
HTTP
Enable HTTP
service
Specify whether to enable the HTTP service.
The HTTP service is enabled by default.