Trace route operation – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 281
260
Trace route operation
The Web interface does not support trace route on IPv6 addresses.
Before performing the trace route operations, execute the ip ttl-expires enable command on the
intermediate device to enable the sending of ICMP timeout packets and the ip unreachables enable
command on the destination device to enable the sending of ICMP destination unreachable packets.
To perform a traceroute operation:
1.
From the navigation tree, select Diagnostic Tools > Trace Route.
2.
Click the Trace Route tab.
The Trace Route configuration page appears.
Figure 234 Trace Route configuration page
3.
Enter the destination IP address or host name in the field.
4.
Click Start to execute the trace route command.
5.
View the result in the Summary field.